Operating instructions

18
V 12/14
APPLIANCE START-UP
Open the packaging and remove the box from above. Remove the product and the other elements supplied (illustrated in
the box below).
LCD remote control
Type AAA
batteries for
the remote
control.
Circular connection for window (1) for
positioning between the end of the tube
and the terminal connection for the
window.
Terminal
connection for
window (2).
Flat connection for positioning between
the air discharge port and the hose
Hose.
Screws.
Clamp Cap Cord storage Drain hose
Window unit kit (3 pcs)
Circular connection for
window unit, for
positioning between the
end of the tube and the
window unit itself.
Window unit.
Cap.
Place the product in a vertical position on a flat, stable surface, as close as possible to a window;
leave a clearance of 50 cm from walls and other objects.
INSTALLING THE CORD STORAGE HOOKS
Install the cord storage hooks to the back of the
unit using the screws, as shown in the figure.
When not using the appliance, wind the power cord onto
these hooks.