Operating instructions

V 12/14

USE WITH TERMINAL CONNECTION FOR WINDOW

Connect the flat connection to the hose, extend the

hose as far as necessary to reach the outside and

connect it to the back of the air conditioner.

Now slide the flat connector downwards into the grooves

(A) and secure it with the hook (B).

The upper side of the flat connector is marked TOP.

Connect the circular window connector (1) to the end

of the hose and then the window terminal (2).

Open the windows and block one of the two leafs with the

handle.

Rest the terminal connector against the fixed section of the

window,and move the other section up towards it.

USE WITH WINDOW UNIT KIT

Make a 135 mm hole in the window panel.

Insert the window unit without its closure cap into the

window. Fit the circular connector into the retractable hose

and insert the hose with its circular connector into the

window unit.

Fit the flat connector to the hose.

Insert the assembled hose into the back of the air

conditioner.