Instruction Manual MODEL NO.: 7340A/7340 7350A/7350 www.argonaudio.
Contents Contents / Accessories P2 Important Safety Instructions P3 Introduction/Unpacking etc. P4 Introduction of Active speaker (Left speaker) features P5 Connecting Your System P6,P7,P8 Troubleshooting P9 Warranty Info P10 Specifications P11 Accessories AC power cable 1/8" audio cable, 1 meters (~6.5ft) Speaker wire (16AWG), 3.0 meters (~12.
Important Safety Instructions 1 Read these instructions for all components 1 Servicing is required when the apparatus has 1 before using this product. 1 Keep these instructions for future reference. 1 Heed all warnings on the product and in the owner guide. 1 Follow all instructions. 1 Do not use this apparatus near water or 1 1 1 1 1 1 1 1 moisture.
Introduction Welcome to the Argon family and congratulations on your purchase! This product was designed and built by our in-house development team and is backed with a 1-year warranty. We had a blast making these speakers and hope they bring you many years of enjoyment. Unpacking Your Argon speakers were carefully tested and inspected before packaging and shipping. After unpacking please check for any damage.
Active speaker (Left speaker) features LEFT SPEAKER REAR FRONT OUT TO RIGHT STEREO INPUT OUT TO RIGHT SPEAKER STEREO INPUT R SUB OUT L AUDIO IN 5VDC CHARGE FOR iPOD POWER ON/OFF SUB OU T AUDIO INPUT 5V DC Charge for iPod POWER ON/OFF AC IN AC 220 POWER LED 240V 50/60Hz VOLUME Argon Speakers Features iPod power charging port (Combo Port) 2 audio inputs Built-in power amplifier, no receiver needed Front panel volume control Kevlar woofers for super low end Silk dome tweeters for sm
Connecting Your System 1 OUT TO RIGHT STEREO INPUT R SUB OUT L AUDIO IN 5VDC CHARGE FOR iPOD POWER ON/OFF 2 1 Step 1 - SPEAKER WIRE CONNECTION Connect the RED (+) and BLACK (-) terminals from the left speaker to the corresponding terminals on the right speaker using the included speaker wire. Be sure to match the red-colored side of the speaker wire with the RED (+) terminals and the black-colored side to the BLACK (-) terminals on each speaker.
MENU BACK VIEW R AUDIO INPUT L A1 A2 AUDIO IN USB CHARGE Configuration A (for use with iPod): A1. For charging your iPod while playing, connect the 30 -pin cable from the iPod to USB jack on the Combo Port. Use the included USB extender cable if extra cable length is needed (for use on a desktop, for example). A2. Connect the long 1/8” mini-jack audio cable from iPod headphone jack to the AUDIO IN jack on the Combo Port.
B1 VIDEO S-VIDEO AUDIO R B2 DVD L VIDEO S-VIDEO AUDIO R L TV CD/MP3 player AUDIO OUTPUT AUDIO OUTPUT OUT TO RIGHT STEREO INPUT R SUB OUT L AUDIO IN 5VDC CHARGE FOR iPOD POWER ON/OFF AC 220 240V 50/60Hz BACK VIEW Configuration B (all products with 1/8" or RCA outputs): B1. Connect the STEREO INPUT L/R from any audio source with RCA L/R audio outputs. B2.
Basic Troubleshooting If the front panel LED does not light up, check... that the AC power cord is firmly plugged into the rear panel and wall outlet. to make sure the speaker rear panel power switch is ON. that the speaker is getting power from the wall outlet. that the rear panel voltage selector is matched to the operating voltage. the fuse in the AC IN on the rear panel. If the fuse needs to be replaced it is extremely important to replace only with same fuse type and value.
Argon Warranty All Argon speakers have a 1-year warranty on parts and labor from date of purchase. Your warranty is automatic, so there is no need to register. What is covered All defective parts or faulty workmanship. What is not covered The warranty does not cover damage caused by accident, misuse, abuse, neglect, lightning, power surges, other acts of nature, unauthorized product modification or repairs, or failure to follow the instructions outlined in the Setup Guide.
Argon 7340A/7340 General Specifications: Type: 2-way, powered speaker system Inputs: 1xstereo input, 1x1/8" stereo mini-jack Outputs: USB Type A (power charging only) Main voltages: 220-240V, 50/60Hz Amplifier type: Dual Class AB monolithic Signal-to-noise: >90dB (typical A-weighted) THD: <0.1% at all power settings Crosstalk: >50dB Frequency response: 60Hz-22kHz +/-1.
Quality has always been our driving force and founding Argon Audio is a natural extension of this philosophy. We have 20 years' experience in creating and specifying high quality products, manufacturing them and selling them on to end users with Value-for-Money as the primary aim. And Argon Audio is a brand fully compliant with these values.
