Operation Manual

w w w . a r g o n a u d i o . c o m 7
DA2
Connecting your speakers
Connect the RED (+) and BLACK (-) terminals from the left speaker to the corresponding terminals on the DA2.
Connect the RED (+) and BLACK (-) terminals from the right speaker to the corresponding terminals on the DA2.
Use good speaker cable, to enhance sound quality. Expect to pay around 4-6US$ pr meter.
The binding posts on the DA2 terminals accepts wire up to Ø 4mm or cables with banana plugs.
Insulation on cable must be stripped on all ends.
.
Connect your Argon DA2 to a subwoofer
Connect the single RCA plug to your Argon DA2 SUB OUT.
You
r subwoofer need to have input for one RCA plug just like there is only one RCA output plug from the DA2.
Connect using this single RCA plug at both ends.
Your Subwoofer might have a Left and Right input. In this case you can choose between two options:
Option 1 is to use one single RCA connection on the subwoofer and you can choose either L or R input and leave the other one
unplugged.
Option 2 is to get a cable with one RCA plug at one end for connection to DA2 and two RCA (L and R) at the other end for
connecting to the Subwoofer.
To make things simple, we recommend you to use only one RCA at both ends, even though your subwoofer might have both an
L and R input.
Warning: You should never connect a Subwoofer using the speaker cables from your Argon DA2 as output to the
subwoofer. Using this option can seriously damage your Argon DA2.
Analogue audio connection
Your Argon DA2 is equipped with 1 analogue audio input.
The analogue input is of the left/right RCA type.
You simply connect the left/right RCA plugs to the corresponding plugs on ex. your CD player (if it doesn’t have digital output)
You can also use this connection for analogue sound out from a TV.
Note: that most new TV remotes can control the Argon DA2 volume if connected to variable TV audio out.