Operation Manual

www.argonaudio.com
15
DAB1+
3.2.3 Selecting audio mode (Auto or Mono)
Follow the steps below to set your radios audio output to Auto or Mono.
During and FM stations broadcast, press the Tuning button to select and audio mode.
In Auto mode, the radio plays the programs default output: stereo or mono.
In Mono mode, the radio plays mono output only. Some stations sound better in this mode if the signal is not
strong enough to receive noiseless stereo signal.
4. Using Basic Functions
4.1 Storing and recalling your stations
Your radio can store up to 6 DAB and 6 FM radio stations as presets.
1. To store a station you are listening to, press and hold any one of button 1~6 number you want to
store the station in. Hold until Preset x stored (Where x is anyone of the 1~6 number selected)
appears in the Display.
2. A new preset overrides an existing one when you store a new station over it.
3. To recall a station you press any one of the 1~6 number buttons, you will hear the corresponding
station that you stored with the corresponding number buttons.