Operation Manual

www.argonaudio.com
17
DAB2+
8. Finally a screen appears that shows “Alarm 1 ON” where the “ON” is blinking. Press the
Tuning/select (3) button/knob to confirm the whole alarm setup. When the Radio is turned off an
Bell (alarm sign) is shown in the top right corner of the display. And you are ready.
4.3.1 To deactivate the alarm
1. Press Snooze (16) button to temporary stop the alarm.
2. To totally stop the alarm in Radio standby mode press the Alarm (7) button continuously until both
Alarm 1 and Alarm 2 shows OFF.
4.4 Use of the Snooze function
1. When the radio is playing, you can press the Snooze (16) button to mute the radio.
2. To turn off the mute function, press the Snooze (16) button again.
Notice that the Snooze function only mutes the build in speaker of the Radio. If you have
connected your Radio to an external amplifier, the Snooze function will not work.
3. In alarm mode the Snooze function will, when pressing the button, mute the alarm for 5 minutes.
After 5 minutes the alarm will sound again.
4.5 <System> settings and information
The radio has a system menu with various functions and information. The system menu can be accessed
from all playback modes.
1. To enter the system settings press and hold the Display (5) button for three seconds.
2. Turn the Tuning/select (3) button/knob until it shows <System> in the display.
3. Activate the System menu by pressing the Tuning/select (3) button/knob.
4. Once in the system menu you can scroll through all the options by turning the Tuning/select (3)
button/knob.