Operation Manual

www.argonaudio.com
3
BlueTooth
2. Bluetooth mode - operation
2.1 to activate Bluetooth
Bluetooth can be activated in two ways:
1) either by pressing the ”SOURCE” buttons until the Radio shows FM→BT in the display
2) or by pressing directly on the ”Bluetooth” button on the front of the Radio (button 17 page 2).
2.2 to connect Bluetooth
1) activate Bluetooth on your Media playback device (Phone, Tablet, LapTop etc)
2) go to Bluetooth settings on your playback device (Phone, Tablet, LapTop etc). Activate Bluetooth (if not
already done)
3) ”Make Device Discoverable” on your playback device (Phone, Tablet, LapTop etc)
4) change to Bluetooth input on your Argon Audio DAB2+BT/DAB3+, either by using the ”SOURCE” button or
directly by pressing the Bluetooth button on the front of the Radio
5) in the display it will then show ”Bluetooth Initial”, followed be ”Bluetooth Connecting”. If your playback
device (Phone, Tablet, LapTop etc) is not already connected the display will show, ”Bluetooth No connection”
6) on you playback device (Phone, Tablet, LapTop etc) and still in the Bluetooth Menu, activate “Scan for
devices”
7) after a few seconds your playback device (Phone, Tablet, LapTop etc) will show that is has found “Argon
DAB2+BT/DAB3+BT” and show the text “pair with this device” - Click ”Pair with this device”.
8) your playback device (Phone, Tablet, LapTop etc) will then show Argon DAB2+BT/DAB3+BT Paired but
not connected”.