Operation Manual

www.argonaudio.com
12
DAB3+
3.3 FM Mode
3.3.1 Selecting FM mode
If you are not in FM mode:
1. Press the Source (6) button continuously, until it shows “FM”. It will start playing on the last played
station.
.
3.3.2 Scanning stations in FM mode
To do an autoscan.
Make sure you are in FM mode.
1. Press the Autotune (2) button to scan for FM stations in ascending frequency.
2. To scan in descending frequency, press and hold the Autotune button for 3 seconds.
Automatic scanning for an FM station begins.
Once a station is successfully scanned it will start playing.
To do a manual scan
1. Turn the Tuning knob clockwise or anticlockwise until you hear an FM stations broadcast, or see
the frequency you want.
3.3.3 Viewing additional Information (Display Information)
Display information containing useful ones such as; time, date, station name, signal strength, program type,
frequency, signal error, kbps quality, including radio services, song titles, and special announcements sent by
your DAB provider.
1. While playing a station in FM mode, press the Display (5) button shortly. Additional information
appears at the bottom row of the display.
2. Each time you press Display (5) button, new Display information will appear.