Operation Manual

www.argonaudio.com
12
DAB Adapter 2+
4. Using Basic Functions
4.1 Storing and recalling your stations
Your Adapter can store up to 6 stations as presets.
1. To store a station you are listening to, press and hold any one of buttons 1~6 number you want to
store the station in.
2. Hold until Preset x stored (Where x is anyone of the 1~6 number selected) appears in the Display.
A new preset overrides an existing one when you store a new station over it.
3. To recall a station you press any one of the 1~6 number buttons, you will hear the corresponding
station that you stored with the corresponding number buttons.
4.2 Setting and checking the sleep timer
This option turns the Adapter off automatically after a specified period.
1. Press Sleep button and it will show “Sleep off” in the display.
2. Keep pressing the Sleep button and for each press it will increase the sleep intervals of 15
minutes, up to a maximum of 90 minutes.
3. Confirm your wished choice by pressing the Select button.
Your sleep function is now activated and an “S” will appear in the top right corner of the display.
4. To deactivate the sleep function follow the steps above, but confirm “Sleep off” instead of a Sleep
time.
4.2.1 Checking the sleep timer setting
1. Press the Sleep button. The amount of time left is displayed on the bottom of the display.
2. To deactivate the sleep function follow the steps as in point 4.2, but confirm “Sleep off” instead of
a Sleep time. Notice: When you press the Power button, the sleep delay mode is deactivated.