Operation Manual

www.argonaudio.com
8
DAB Adapter 2+
3. Using Your Argon DAB Adapter2+
3.1 Quick start
3.1.1 Start up
1. Mount the antenna in the antenna plug. If you use the included antenna, remember to split the
antenna into a “T”.
2. Plug the Power supply into an electric outlet and into the back of the Adapter.
3. Press “power” On
4. The Adapter will start searching for DAB stations automatically. This may take a few minutes and
the progress will be shown in the display.
5. Once finished searching, the Adapter will start playing the first found station.
3.1.2 Basic Operating
1. Stations can be chosen by pressing the “arrows” on the remote.
2. Once the prefer station is found press the “Select” knob and the chosen station will start playing.
3. To store a station on one of the 1-6 preset buttons, press and hold the wished preset button for 3
sec., while playing the station that you want to store.
4. When stored, the display will show “Preset X saved”