Operation Manual

www.argonaudio.com
9
DAB Adapter 2+
3.2 DAB mode
The Adapter displays the correct time after a full scan has been preformed for the first time.
(Normally done automatically at first time installation). Your Adapter retrieves the time information
from a DAB station.
3.2.1 Scanning stations
There are two ways to scan for stations:
• Automatic full scan (autotune )
• Manual scan
To do an automatic full scan:
1. Press Auto scan button <Full scan> will show in the display.
This may take a few minutes. When there scan is finished the first found station, starts to play
immediately.
2. To preview another station, press Arrow buttons until the name of another station appears.
3. Press the Select button to select and listen to the new station.
4. You can also to a Full scan from the Menu. Press Menu button and use the Arrows to scroll to
Full Scan. Press Select.
To do a manual scan
1. Press and hold the Menu button.
2. Press the Arrow buttons until the display shows <Manual Tune>.
3. Press the Select button to activate manual tune.
4. To choose a frequency manually press the Arrow buttons.
5. Confirm by pressing the Select button.