SUB10 02 OWNER’S MANUAL 05 ILLUSTRATIONS 07 SPECIFICATIONS 07 TROUBLESHOOT ww w. a r g on au d i o.
SUB10 Owner ’s manual Dear Customer, Quality has always been our driving force and founding Argon Audio is a natural extension of this philosophy. We have 20 years’ experience in creating and specifying high quality products, manufacturing them and selling them on to end users with Value-for-Money as the primary aim. And Argon Audio is a brand fully compliant with these values.
SUB10 Running-in period We recommend a running-in time of your new SUB10 Subwoofer of approximately 15-20 hours at normal listening level before you decide on the final positioning and control settings of the Subwoofer. During the running-in time the drive units will settle in and perform as intended. Connecting your Subwoofer We recommend that you read the manual of your Amplifier or AV-receiver carefully before connecting your Subwoofer.
Environmental information Argon SUB10 Subwoofer complies with international directives on the Restriction of Hazardous Substances (RoHS) and Waste of Electrical and Electronic Equipment (WEEE) - the crossed bin symbol indicates compliance and that the products must be appropriately recycled or processed in accordance with these directives. Safety instructions Please store this instruction manual for future reference. Do not use this product near water or moisture. Clean only with a dry cloth.
SUB10 Rear panel and connections 1 2 10 3 4 5 9 6 7 8 7 ww w. a r g on au d i o.
SUB10 Subwoofer positioning As explained on page two under “Subwoofer positioning” you have various choices. The above illustrations are the optimal placements of both loudspeakers and the Subwoofer. However, in “real life” it can be difficult to set up at sound system optimally. As mentioned, the Subwoofer is the loudspeaker that is least affected by the positioning. So once again, feel free to experiment. ww w. a r g on au d i o.
SUB10 Specifications Troubleshooting Type: Closed pressure cabinet Speaker: 1X10” woofer Driver Inputs: L/R RCA stereo input, Speaker terminal inputs Output: Speaker terminal output for sat. speakers Main voltage: 220-240V, 50/60Hz Amplifier type: Class A/B Amplifier Woofer: 10” Long stroke Woofer Speaker Phase regulation: yes 0 or 180 degrees Volume regulations: yes Auto stand-by: yes after 10 min.
