Sub8 OPERATING INSTRUCTIONS
I M P O R TA N T S A F E T Y I N S T R U C T I O N S Before using this subwoofer, please read the following instructions carefully observing all the safety hints. Please keep this manual in a safe place for future reference. 1) Keep the power cords well protected, i.e. do not allow heavy objects to crush the cable or leave it twisted as this may cause the cable to fray resulting in electric shock. If you must use an extension cord, please try to keep the length to a minimum.
TO THE CUSTOMER: Thank you very much for purchasing this Argon audio subwoofer. We have designed this product to be extremely easy to operate but do read the instructions carefully to maximize your long term enjoyment. Be sure not to overload the speakers which can easily happen if the volume is set too high. If you notice distortion please turn the volume down quickly as permanent and expensive damage can be caused by overloading which is not covered by warranty.
FUNCTION Output power: 80w Sensitivity: 72dB Input sensitivity: 110mv Frequency response: 40Hz-200Hz + - 3dB Power supply: AC 240V /50/60 Hz H ANDY HINTS Although your subwoofer comes with high level inputs and outputs these are ideally only used for older amplifiers or receivers which do not have the sub-out facility. If you do have this facility, then connect the subwoofer from sub out on the amp/receiver to either of the line inputs.
