TT-2 02 OWNER’S MANUAL 03 ILLUSTRATIONS 04 CONNECTIONS 06 SETUP & USAGE 09 SPECIFICATIONS 10 TROUBLESHOOT ww w. a r g on au d i o.
TT-2 Owner’s manual Dear Customer, Quality has always been our driving force and founding Argon Audio is a natural extension of this philosophy. We have 20 years’ experience in creating and specifying high quality products, manufacturing them and selling them on to end users with Value-for-Money as the primary aim. And Argon Audio is a brand fully compliant with these values.
Please contact the manufacturer to be referred to an authorized service center near you. To prevent risk of fire or electric shock, avoid over loading wall outlets, extension cords, or integral convenience receptacles. Do not let objects or liquids enter the product. Use proper power sources. Plug the product into a proper power source, as described in the operating instructions or as marked on the product.
Controls, features and connections ww w. a r g on au d i o.
Controls, features and connections 1 Power switch 2/22 Stepped drive pulley and drive belt 3 Platter with felt mat 4/4a Tonearm counterweight - 4a Downforce scale 5 Tonearm lift lever 6/66 Tonearm rest and removable transport lock 7 Tonearm tube 8 Anti-skating weight adjustment scale 9 Anti-skating weight support hoop 10 Anti-skating weight with wire 11 Headshell with finger lift and fitted Ortofon OM 5E cartridge 12 Signal output cable 13 Power supply socket (on USB version in middle) 14 Lid hinges with Hi
TT-2 Setup and usage In order to achieve maximum performance and reliability with this record player you should study these instructions for use carefully. The Argon Audio TT2 record player is supplied with a factory fitted and adjusted cartridge. During assembly and adjustment of the deck, small parts could be lost if not carefully placed in a suitable receptacle. Before starting assembly make yourself acquainted with the parts listed above and correspondingly numbered in the technical drawings above.
TT-2 Anti-skating force adjustment The anti-skating force must be adjusted according to the mass of the cartridge as follows: Downforce Groove in the stub (8) 10 - 15mN 1st from bearing rings 15 - 20mN 2nd " " " rd " " " 20mN and bigger 3 Slip the loop of the anti-skating weight's thread over the second groove of the stub to set the correct anti-skating force for the factory-fitted cartridge. Feed the thread through the loop of the wire support (10).
TT-2 Mains power connection The turntable is supplied with a power supply suitable for your country's mains supply. Check the label before connecting to ensure compliance with the mains rating in your house. Connect the low voltage plug from the power supply to the socket (13) on the rear of the record player before connecting the power supply to the mains.
TT-2 Technical specifications Argon Audio TT2 Nominal speeds Speed variance Wow and flutter Signal to noise Downforce range Effective tonearm length Overhang Power consumption Outboard power supply Dimensions (W x H x D) Weight USB Version specific 33,33/45,11 r.p.m..
Troubleshoot - Potential incorrect use and fault conditions TT-2 Argon Audio turntables are manufactured to the highest standards and undergo strict quality controls before leaving the factory. Faults that may possibly occur are not necessarily due to material or production faults but can sometimes be caused by incorrect use or unfortunate circumstances. Therefore the following list of common fault symptoms is included.