Assembly Instruction

Important - Please read these instructions fully before starting assembly

Rosa 5 Light Flower Floor Lamp

Assembly Instruction - Please keep for future reference

257/3432

you need help or have damaged or missing parts, call the Customer 0345 640 0800

PAGE 1
Rosa 5 Light Flower Floor Lamp Assembly Instruction - Please keep for future reference 257/3432 Important - Please read these instructions fully before starting assembly you need help or have damaged or missing parts, call the Customer 0345 640 0800
PAGE 2
Important • • • • • • • • Read these instructions carefully and familiarize yourself with the procedure before assembling the unit. Take all the components and fittings out of the plastic bag and separate them into their groups. Ensure you have enough space to lay out all the parts before assembly. Always be sure to use the correct type and wattage of bulbs as indicated on the fitting. Never exceed the wattage stated. To avoid scratching it is recommended that you assemble the unit on a soft level surface.
PAGE 3
Maintenance This fitting is designed for indoor use only and must be fitted to a DRY SURFACE as any dampness in plaster or paint can damage the finish. Do not use polish or abrasive cleaner - just a soft dry cloth. BULB REPLACEMENT 1. Switch off the mains power supply. 2. Before replacing the bulb, allow it to cool down for at least 10 minutes. 3. Never touch the bulb with your fingers directly, cover it with a cloth. 4. Loosen the bulb and remove it from the lamp. 5.