Operating Instructions

8
7
Fig 8a
Put the burner (A6) through the hole of the firebowl (A7) as Fig 8a.
Align all valves on the control panel assembly (B8) against each venturi of the burner (A6). Make sure all
the valve tips go into the venturi tube completely with good alignment. Fix the burner (A6) on the firebowl
(A7) using ST4*10 bolts (E3) as Fig 8b.
Put the burner electrode in the valve on the control panel assembly (B8).
Fig 7
Set the firebowl (A7) on the left upper support (B6) and right upper support (B7) using M6*20 bolts (E1) as
Fig 7.
8
Fig 8b
B7
B6
A7
A6
A7
PDF created with pdfFactory trial version www.pdffactory.com