Assembly Instructions

Finished
top edge
Finished
top edge
Finished
front edge
Finished
front edge
A
Assembly Instructions
7
Step 9
Step 11
Step 10
D
D
D
D
A
Finished
front edge
Prepare the horizontal
Insert 4 large locking
nuts into the
horizontal .
Tap 2 wooden dowels
into the horizontal .
D
15
A
15
15
B
D
Fit the horizontal to
the divider
Push the horizontal
onto the divider .
Use a screwdriver to
tighten the 2 large
locking nuts fitted to
the horizontal .
Note: Turn the large
locking nuts as far as
they will go - more than
1/2 a turn.
10
15
D
D
15
15
10
Finished
front edge
H
U
H
U
H
U
H
U
H
H
H
B
B
Prepare the small
divider
a: Place a runner on
the small divider .
Slide back the top of
runner and use the 2nd
hole from the front to fit
the 1st screw .
b: Slide the runner
back the other way and
fit the 2nd screw into
the corresponding hole
in the small divider .
Screw 2 metal dowels
into the small divider .
U
16
H
H
16
16
a:
b:
B
16
16