3 SEATER METAL SWING CHAIR 7495498 176 112 150 IMPORTANT-PLEASE READ THESE INSTRUCTIONS FULLY BEFORE STARTING ASSEMBLY 0345 6403030
18 330 This product is for domestic use.
0345 6403030 1 2 3 Front Leg x 2 Rear Leg x 2 5 Upper Connect Tube x 1 6 Canopy Tube x 2 7 Seat Cushion x 1 9 Canopy U-shape Tube x 2 8 Armrest x 2 10 Hanging Tube x 4 4 Canopy x 1 11 Lower Connect Tube x 1 12 Side Connect Tube x 2 Seat x 1 Bradawl,spanner and screwdriver are required but excluded.
A: L E B: 2 person required G A: Connect the 2 parts of upper connect tube together and use bolts G washers and nuts to fasten. fig.1 C K 3 B B: Then fix front leg ,upper connect tube and rear leg together using bolts washers and nuts . C: Fix the feet J to the legs. 2 1 2 Then use nut covers K L to cover the nuts (See fig .1) 1 C: J Fix side connect tube between front leg and rear leg using bolts G , washers and nuts . fig.2 L E G Then use nut covers L to cover the nuts (See fig .
4 A: Cap the both ends of the hanging tubes 9 by plastic sleeve M . B: Fix the armrest 7 and hanging tubes 9 to the seat 12 using bolts D F H , washers and nuts . ! Important: Before open the seat, please adjust the textiene to right position and differentiate the seat and back side. fig.4 12 9 B: D Then use nut covers L to cover the nuts (See fig .4) F E 9 E 7 H B: E fig.5 A 5 5 A:Use spring hook I to hang the seat, then put seat cushion 6 on the seat.
