Assembly Instructions

Step 12

Fit the ltop

Push the top onto

the assembly.

Use a screwdriver to

tighten the 6 large

locking nuts fitted to

left end , upright

and right end .

Step 13

1 2

Fit the back

a: Square up the unit by

making sure that

measurement x to x

equals y to y.

b: Place the back

onto the unit.

Nail around the

outside edges of the

back .

Note: Nails should be

spaced about 150mm

apart.

The measurement from top corner X to bottom corner X must be

equal to the measurement from top corner Y to bottom corner Y