Assembly Instructions

Step 16

Step 17

Fit the back

a: Square up the unit by

making sure that

measurement x to x

equals y to y.

b: Place the back

onto the unit.

Nail around the

outside edges of the

back .

Note: Nails should be

spaced about 150mm

apart.

Carefully stand the

unit up for the next

step.

The measurement from top corner X to bottom corner X must be

equal to the measurement from top corner Y to bottom corner Y

Fit the drawers

Starting with the bottom

drawer, slide both the

runners forward and

locate the drawer

sides and

between them, lining up

the holes in the drawer

wrap with the 2nd

'threaded' holes in the

runners .

Working from the inside

of the drawer, insert 2

screws through the

drawer sides and out into

the 2nd threaded hole in

the runner .

Note: Do not overtighten

the screws .

If they catch on the

runner you may need to

loosen them slightly.

2nd threaded

hole

7 8