New bury King Bed Frame Assembly Instructions Please keep for future reference e 618/55610 Heart of House Dimensions Width x Depth Height 239 5cm x 164.5¢m x 93.
| Important — Please read these instructions fully before starting assembly «Cheek you have all the components and tools listed on pages 2 and 3. * Remove all fittings from the plastic bags and separate than into their groups. « Keep children and animals away from the work area, small parts could choke if swallowed. * Make sure you have enough space 1o layout the parts before starting.
Please check you have all the fittings listed below Note: The quantities below are the comet amour 1o complete the assembly. ly sons cases bore fittings may bie supplied than are required.
Attaching side rails 4 Attach 7 bolt Bl 1o the headboard [3] and footboard[dJusing the Allen key @3 provided b: Boston left side rail 2] adjacent 1o headboard halt the holes in the headboard line Up With the bracket oo the side rank Secure 1 place by 2 bolts 0 sing the Allen hey provided Rep oat b for onion side rail Do not fully tighten at this stage.
Step 3 Central support assembly Insert the feet B anti the heels on the contra support rally] and secure using bolts @) and washers (83 Attach central support Secure the central support rail [5] to the headboard [3] using bolt @ and washers @ Repeat at the foot hoard end adjust the feet so that they are not in contact with the floor when the mattress is in place. There should be a 10mm inch) gap.
Place coats & Strengthened tootsie ] a: info e end slat cap: and central sit caps as shown, boastfulness . DU side rats [T] 8171 and central support rains | by firmly pushing into place. After all the parts are positioned vou can now fully tighten all bolts fixed on previous steps.
