Assembly Instructions

Assembly Instructions
10
Step 17
Profiled
top edge
Finished
top edge
Finished
top edge
Profiled
top edge
Prepare the front
plinth
Screw 2 metal dowels
into the front plinth .
Step 18
A
6
Fit the plinths together
Push the 2 side plinths
onto the front plinth .
Use a screwdriver to
tighten the large locking
nuts fitted to the side
plinths .
7
6
B
7
A
A
6
6
7
7
Fit the plinths
Position the 3 plinths
onto the assembly
ensuring that the bottom
edge of the plinths are
flush with the bottom
edge of the sides, as
shown.
Secure the 2 side plinths
. through the left end
. . and right end
using screws .
7
1 2
G
7
Step 19
G
G
G
G
7
1
2
7
Polystyrene
block
Note: To make it easier to fit the top and plinths, place polystyrene blocks
from the packaging underneath both side panels to raise the assembly.
Polystyrene
block
G
Polystyrene
block
Polystyrene
block