User's Instructions

3 Customer Helpline 0345 640 3030
Safety Information
IMPORTANT – Please read these instructions fully before installation and keep for future reference
CAUTION! Always disconnect power supply when servicing or cleaning.
Cleaning
- Use a clean dry soft or slightly damp cloth.
- Do not use abrasive cloths or polishes as this may cause damage to the product.
Changing the bulbs
IMPORTANT! Ensure that the bulb has cooled down before replacing.
- Ensure that the power supply has been disconnected.
- Carefully remove the protective glass shields.
- Insert replacement bulbs avoiding contact with your fingers as this will shorten the bulb life.
- If the bulb comes into contact with fingers clean the bulb with a soft dry cloth or tissue.
IMPORTANT!
If the external flexible cable or cord if this Luminaire is damaged it shall be exclusively replaced by the
manufacturer or his service agent or similar qualified person.
Maintenance
Maintenance
For your safety, this product must be installed in
accordance with local building Regulations. If in any
doubt, or where required by law, consult a competent
person who is registered with an electrical self
certification scheme. Further information is available
online or from your local authority.
IMPORTANT -This product has been designed for
non-professional, domestic use only.
IMPORTANT - Carefully unpack and examine the
product for any damage. If you think there is a defect,
do not use the product and contact our customer
services on 0345 640 3030.
IMPORTANT - Dispose of all packaging correctly and
responsibly and in accordance with all local laws and
regulations. Never leave packaging components within
reach of children as they can be a source of danger.
IMPORTANT – Before inserting or replacing bulb(s)
ensure the power is switched off and the bulb(s) have
cooled down.
WARNING – This is a Class I product and requires an
earth connection.
WARNING – Do not modify or alter any product be-
fore or after installation. This may render the product
un-safe.
WARNING - Accessible parts become hot during use,
young children must be kept away.
WARNING - This product is not intended for use by
persons (including children) with reduced physical,
sensory and mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or
instruction concerning use of the product by persons
responsible for their safety.
WARNING - Children should be supervised to ensure that
they do not play with the product.
WARNING - Do not place this fitting in a damp
atmosphere.
WARNING – Do not remove the metallic reflective
shield.
WARNING – If the Glass shields are damaged or bro-
ken they must be replaced before continuing to use the
Floor Lamp.
CAUTION - Ensure the power is switched off before
cleaning or carrying out any maintenance.
SPECIAL NOTE—Should the dimmer fail to operate
as normal, please check and replace the fuse in the
dimmer unit (spare fuse supplied).