Assembly Instructions

Simple Assembly Instructions - Please keep for future reference

IMPORTANT

. Read these instructions carefully and

familiarise yourself with the procedure

before assembling the unit.

. Check that you have all the component

parts following the list on the back

cover and familiarise yourself with

each part before proceeding.

. Take all the fittings out of the plastic bag

and separate them into their groups.

. Ensure you have enough space to lay out

all the parts before assembly.

Grey And Chrome Tidy Rail With Two Rails

. To avoid scratching it is recommended

that you assemble the unit on a soft

level surface.

9-07

Components

. Phone After Sales 08456 400 800

4 x Castor

1 x Hanger

2 x Lower Side Support

1 x Top Crossbar

2 x Upper Side Support (Inserted inside component B)

2 x Bottom Crossbar

2 x Connector

2 x Leg Section

2 x Lock

8755027

PAGE 1
Components Grey And Chrome Tidy Rail With Two Rails A 1 x Hanger Simple Assembly Instructions - Please keep for future reference 8755027 B 2 x Lower Side Support C 1 x Top Crossbar D 2 x Upper Side Support (Inserted inside component B) E 2 x Bottom Crossbar F 2 x Connector H 2 x Lock J 4 x Castor IMPORTANT 1. Read these instructions carefully and familiarise yourself with the procedure G 2 x Leg Section before assembling the unit. 3.
PAGE 2
Assembly Instructions Assembly Instructions Stage 1 – Fitting the Feet Stage 2 – Fitting the Rail Check Before Assembly G There are many different kinds of Screws and Panels. Ensure you check all before assembly. NOTE: It would be useful to ask someone to help you at this stage. E G 1. Insert Top Crossbar C into the Connectors F . See fig. 4. fig. 1 NOTE: It would be useful to ask someone to help you at this stage. fig. 4 F F 2. Insert Upper Side Support D into the Connectors F . See fig. 5.
PAGE 3
Assembly Instructions Assembly Instructions Stage 3 – Fitting the Hanger Stage 4 – Finishing the Unit NOTE: It would be useful to ask someone to help you at this stage. NOTE: It would be useful to ask someone to help you at this stage. A H H desired location. See fig.11 fig. 6 1. Insert Hanger A into the Lock H . 1. Carefully place the unit in the See fig. 6. Unlocked 2. Insert Locks H into the Bottom Side Support B . See fig. 7. fig. 8 J into the bottom 3.