Double Heavy Duty Covered Rail-White/Black Assembly lnstructions - Please keep for future reference 460/9830 487/5846 Dimensions Width - 117cm Depth - 50cm Height - 160cm Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts,call the Customer helpline: 0345 6400800 Issue 1-25/0 /15
! Safety and Care Advice Important - Please read these instructions fully before starting assembly • Check you have all the components and tools listed on page 2. • Remove all fittings from the plastic bags and separate them into their groups. • Keep children and animals away from the work area, small parts could choke if swallowed. • Make sure you have enough space to layout the parts before starting • Do not stand or put over weight on the parts this could cause damage.
Components - Parts If you need help or have damaged or missing parts, call the Cust omer helpline: 0345 6400800 Please check you have all the parts listed below 1 Thin rods x 2pcs(80cm) 2 Thin rods with screw thread x 2pcs(80cm) 3 Shelf x 3pcs(117x50cm) 4 Thin rods x 2pcs(85cm) 5 Thin rods with screw thread x 2pcs(80cm) 8 Cover x 1pcs 6 Support bar x 1pcs(117cm) 7 Hanging rail x 1pcs(117cm) 10 screw thread x 2pcs 9 Plastic holder x 28pcs Components - Fittings Please check you have all the parts li
Assembly Instructions Step Step 1 1 1 Note: It would be useful to ask someone to help you at this stage. a: Attach connector 9 to thin rods 1 and 2 2 1 2 a: 9 b: Insert shelf 3 into thin rod 1 and 2 , then fix shelf 3 in the bottom 3 1 b: 1 2 2 c: Attach plastic part 9 to the desire position as shown. Insert shelf 3 into rod 1 and rod 2 3 c: 1 2 1 9 2 3 d: Insert rod 4 into rod 1 .
Assembly Instructions Step 2 6 a: Attach plastic part 9 to the desire position as shown.Insert support bar 6 into the rod 4 a: 4 4 4 4 6 9 b: Attach plastic part 9 to the desire position as shown. Insert shelf 3 into the rod 4 and rod 5 c: Attach hanging rail 7 to the shelf 3 as shown.
Assembly Instructions Step 3 a: Fitting the cover 8 into the assembled frame as shown in the figure. a: Note: It is recommended that two people fit the cover to the frame. 8 b: Fasten the ties at bottom.
Assembly Instructions Step 4 Fixing to wall A wall It is recommended that the wardrobe is fixed to a wall. Note: The correct type of fixing must be used for your wall,seek professional advice if doubt. B Top panel Mark the fixing hole on the wall and remove the wardrobe. Drill a hole and insert a wall plug B . ! Warning: Before drilling, check the wall for hidden pipes and cables. Reposition the wardrobe and fix the wall strap using screw A . The assembly is now complete.
7
