Assembly Instructions

3
mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170
Tools required
mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170
Ruler - Use this ruler to help correctly identify the screws
Please check you have all the fittings listed below
Note: The quantities below are the correct amount to complete the assembly. In some cases
more fittings may be supplied than are required.
Components - Fittings
If you have damaged or missing components, call the
Customer Helpline: 0870 112 1928 or email:
[e-mail] (quoting your original order number
and the reference numbers below)
A
Wooden dowel (F22) x 4
B
Metal dowel (F901) x 10
C
D E F
G
Small locking
nut (F3) x 10
40mm Screw (F910) x 6
Handle (F300) x 10
H
Nail (F51) x 15
I
R (F601)
L (F600)
F599
F599
Drawer stops (F599) x 10
Runners (F600) x 5 and (F601) x 5
25mm Screw (F95) x 10
Rule Scissors Hammer
Eye protection
(when using a
hammer or drill)
Cross-head
screwdriver
Electric drill
(do not use for
fitting screws)
Strap Screw Washer x 2
Overbalance protector kit (F269) x 1