Assembly Instructions

4
F
Step 1
Assembly Instructions
If you have damaged or missing components, call the
Customer Helpline: 0870 112 1928 or email:
[e-mail] (quoting your original order number
and the reference numbers below)
x 5
B
B
B
5
x 5
Prepare the drawer
fronts
Screw 2 metal dowels
into each of the drawer
fronts .
Note: Tighten the metal
dowels up fully against
the panel.
B
5
6
C
6
C
C
x 5
Fit the drawer base
Place the drawer base
into the narrow slot on
the drawer wrap .
Fold the wrap around the
drawer base.
7
7
6
6
Step 3
Prepare the drawer
wraps
Insert 2 small locking
nuts into each of the
drawer wraps .
Note: The arrow on the
locking nut must point
towards the hole in the
edge of the panel.
Step 2
C
6
Note: Due to the manufacturing
process, the holes for the
locking nut can be on either
surface of the drawer wrap.
Note: The locking nuts can be on
either surface of the drawer sides.
Make sure that the small groove
is on the inside, as shown.
Plain chipboard
surface