Assembly Instructions

IMPORTANT

SLIDING MIRROR DOOR CABINET

Simple Assembly Instructions

Page 1

Door Knob x 2

Base x 1

Top with blocked

runners x 1

Side x 2

Washer x 2

Doorknob

Screw x 2

Glass

Door x 2

Wall plug x 2

40mm Screw x 8

50mm Screw

x 2

Cap x 8

Shelf Support

x 4

1. Read these instructions

carefully and familiarise

yourself with the

procedures.

2. Check that you have all

the component parts

and fittings listed below

and familiarise yourself

with each part before

proceeding.

3. To avoid scratching it is

recommended that you

assemble the cabinet

on a soft level surface.

COMPONENT PARTS AND FITTINGS

Back x 1

Shelf x 1

PAGE 1
SLIDING MIRROR DOOR CABINET Simple Assembly Instructions Page 1 IMPORTANT 1. Read these instructions carefully and familiarise yourself with the procedures. 2. Check that you have all the component parts and fittings listed below and familiarise yourself with each part before proceeding. 3. To avoid scratching it is recommended that you assemble the cabinet on a soft level surface.
PAGE 2
Assembly Instructions Page 2 THE FRAME fig. 1 1. Take Base A and secure it to Side B B using Caps K and Wood Screws J (See figs 1 and 2). A K fig. 2 2. Attach the second Side B to Base A B in the same way (See figs 1 and 3). J A 3. Next, slide Back D down into the grooves making sure that the screw holes are at the top (See figs 3 & 4). 4. Fix Top C to the two sides B in the B same way as the base (See figs 1, 3 and 5). 5. There are two positions for Shelf E .
PAGE 3
Assembly Instructions Page 3 FITTING DOOR KNOBS Back of glass door 1. Fit Screw I into Washer H and push it through the hole in the back of the I Glass Door F . Then carefully screw the Doorknob G on the glass side of the door. (See fig 7). G FITTING THE DOORS H fig. 7 1. Take the left door and fit the top edge F into the back runner in top C . Then let it drop down into the back runner in Base A (See figs 8, 9 & 10). 2.