Assembly Instructions

ManualsBrandsArgos Home ManualsHome and furniturePaolo 3 Seater Power Recliner Sofa - Brown

1. Read these instructions carefully and

familiarise yourself with the procedure

before assembling the unit.

2. Check that you have all the component

parts following the list on the back

cover and familiarise yourself with

each part before proceeding.

3. Take all the fittings out of the plastic bag

and separate them into their groups.

4. Ensure you have enough space to lay out

all the parts before assembly.

Components

5. To avoid scratching it is recommended

that you assemble the unit on a soft

level surface.

Seat Unit

1 x Left Back Cushion 1 x Centre Back Cushion

1 x Right Back Cushion

Simple Assembly Instructions

- Please keep for future reference

1 x Left Arm Cushion

1 x Right Arm Cushion

TC NEW PAOLO 3 SEAT POWERED

5709708

5531794

5555646

5536847

Important-Please read these instructions fully before starting assembly

If you need help or have damaged or missing pants,call the

Customer Helpline:

0345 640 0800

0345 601 2895

Fittings

Mains Electricity Supply1x

Summary of content (4 pages)

PAGE 1
Components TC NEW PAOLO 3 SEAT POWERED A Seat Unit Simple Assembly Instructions - Please keep for future reference B 1 x Left Back Cushion C 1 x Centre Back Cushion E 1 x Left Arm Cushion F 5709708 5555646 5531794 5536847 D 1 x Right Back Cushion 1 x Right Arm Cushion Important-Please read these instructions fully before starting assembly Fittings If you need help or have damaged or missing pants,call theCustomer Helpline: tfeL G 1x Mains Electricity Supply 1.
PAGE 2
Assembly Instructions Assembly Instructions Stage 1 – Preparing the Seat Unit Stage 2 – Fitting the Back Cushions NOTE: It would be useful to ask someone to help you at this stage. Fig. 1 NOTE: It would be useful to ask someone to help you at this stage. - Carefully tilt back the seat unit onto it's back. See fig.1. D F 2. Attach the Left B , Centre C and Right Back Cushions D to the seat unit A . Then engage the metal locks and push them together until you hear E them lock into position. Fig.
PAGE 3
Assembly Instructions Assembly Instructions Stage 3 – Operating the Unit Stage 4 – Finishing the Unit 1. Finally carefully place the unit in the desired location. See fig. 8. WARNING:If the supply cord is damaged,it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. - 1.Remove and unpack the fittings which are stored under the Seat Unit A . See fig. 6. thg A iR tfe L fig.
PAGE 4
Assembly Instructions Assembly Instructions Stage 5 - Arm cushion assembly steps 1. Please fix the arm cushion by zipping it onto the outside of 3. Press the seat cushion next to the the armrest. inside of armrest. then stick the See fig. 9. velcro into the inside of armrest. See fig. 11. fig. 9 2. Adjust the arm cushion with the right position onto the armrest . See fig.10. fig. 10 fig.