Ottawa Bar Stool Assembly Instructions - Please keep for future reference 600/0444 600/0468 600/1429 Dimensions Width - 46.5cm Depth - 39.5cm Height - 98.
Safety and Care Advice Important - Please read these instructions fully before starting assembly Check you have all the components and tools listed on pages 2 and 3. Keep these instructions for future use. Dispose of all packaging carefully and responsibly. Place the product on flat and steady surface during use. Keep children and animals away from the work area, small parts could choke if swallowed. Care and maintenance Clean using a damp cloth or a proprietary domestic furniture polish.
Components - Parts Please check you have all the parts listed below 1 Seat pad (46x17cm) 2 Stem (42x30cm) 4 Collar (7.5x2cm) 5 Base (38x8cm) 3 Piston (52x5.
Components - Fittings If you have damaged or missing components, call the Customer Helpline: 08456 400800 Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.
Assembly Instructions Step 1 Attaching seat frame Place seat pad 1 upside down onto a clean flat surface. A 2 A Front Ensuring the foot rest is at the front, assemble main stem 2 to seat pad 1 using fixings A . A A Back 1 Front Step 2 Attaching base frame Place base 5 onto the floor. Locate collar 4 onto the base. Firmly push piston 3 into the base.
Assembly Instructions Step 3 Attaching seat frame and base frame First remove the black plastic cap on top of cylinder 3 . Carefully lower seat assembly onto the end of piston 3 until the piston is located into the seat. Firmly push down on the seat to ensure it is securely located.
Assembly Instructions Step 4 Height adjustment The lever on the right hand side of the chair can be used to adjust the chair height. Simply lift the handle to operate. Note: Due to dryness of the seals during shipping, it may take several attempts to operate the height adjustment function first time. Note: If the adjuster will still not function correctly, remove the seat assembly and depress the top of the piston to fully extend it. Re-assemble the seat and try adjuster again. 3 Assembly is complete.