/\ Safety and Care Advice Product Details Functional Simple Workstation 17/2413 IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY. + Keep children and animals away from the work ares, slam! parts could choke if swallowed. » Make sure you have enough space to layout the parts before starting. Assemble the item as close to its final position (in the same room) as possible. + Assemble on a soft level surface to avoid damaging the unit or your floor.
Fittings {Shown to Scala) Bag eux» 57mm Screw x 8 Locking nut 4 Locking pin Plastic plug x8 12mm Screw x 8 12mm Screw x 4 Nut Left track Right track x 1 Front castor x 2 Castor x 2
Tools Required Phillips screwdriver C3 (small & medium) ( = — Phillips screwdriver {small & medium) Small hammer Lars hammer BFF Pencil a Mallet 9 Ruler/tape measure Eye protection {whitening hammer or glue} Power Drill Drill Heads
Left side (66.5 x 39.8cm) [3] Table top (55 x 45cm) Shelf (51.6x23.7cm) [2] Right side (66.5 x 30.8cm) [4] Keyboard drawer (49.5 x 23.7cm) [5] support (51.
