HM Wide Media Unit 457/2156 651/5070 Care & Instruction Manual Please read and retain these instructions for future reference
Safety and Care Advice Important – Please read these instructions fully before starting assembly • Check you have all the components and tools listed on the following pages. • During assembly do not stand or put weight on the product, this could cause damage. • Remove all fittings from the plastic bags and separate them into their groups. • Assemble the item as close to its final position (in the same room) as possible.
Components - Panels If you have damaged or missing components, call the Customer Helpline: Argos = 0345 6400800 Please check you have all the panels listed below 1 Top panel (60.6 x 13.1cm) 2 Bottom panel (60.6 x 19.6cm) 15.5 Finished front edge 20.6 3 Right side panel (111 x 13cm) 15.5 4 Left side panel (111 x 13cm) 20.6 Finished front edge 5 Middle Shelf (use screw) (58 x 12.9cm) 6 Shelf x 4 (use dowel) (58 x 12.9cm) 7 Small support x 3 (14.9 x 12.8cm) 8 Large support x 6 ( (20 x 12.
Components - Fittings Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.
Assembly Instructions Step 1 a: Insert dowels a: Insert Dowels B into Right side panel 3 and Left side panel 4 . B B 3 4 b: Insert Dowels B into Small support 7 , Large support 8 and Shelf 6 .
Assembly Instructions Step 2 - continued Attaching panels a: a: Position Small support 7 , Large supports 8 onto Middle shelf 5 . Finished front edge 7 5 8 8 b: Position Shelves onto unit. 6 b: Finished front edge 6 7 8 8 6 Continued on next page.
Assembly Instructions Step 2 - continued c: Position Small c: Finished front edge supports 7 onto unit. 8 8 6 6 7 d: Position Shelves onto unit. 6 d: Finished front edge 6 8 8 7 6 Continued on next page.
Assembly Instructions Step 2 - continued e: Use Screws A to fix e: Right side panel 3 and Left side panel 4 onto unit. Finished front edge Use Screw covers D to cover the screw heads. 15 .5 A D D A 3 20 .6 6 6 5 6 A D D f: Position Small 6 4 A f: support 7 onto unit. Finished front edge 7 3 4 Continued on next page.
Assembly Instructions Step 3 Attaching Top and Bottom panel a: a: Use Screws A to fix Top panel 1 onto unit. Finished front edge D Use Screw covers D to cover the screw heads. A D A D A D 1 A 7 3 4 b: Position Large b: supports 8 onto unit. Finished front edge 3 4 6 8 8 Continued on next page.
Assembly Instructions tructions Step 3 - continued a: Use Screws A to fix d: Bottom panel 2 onto unit. Finished front edge 3 8 4 8 2 A A A A a: Step 4 Fixing back panel Attach back panel using nails C . 9 Important: The unit MUST be ‘square’ when back is attached.
Assembly Instructions Step 5 Fixing to wall Warning: In order to prevent overturning, this product must be used with the wall attachment device provided. Use Screws(2 pcs) E to fix Wall straps(2 pcs) G onto the unit. With help, move this product into position. Note: Wall plugs supplied are for solid wall only. wall G F be used for your wall, seek professional advice if in doubt G E G G F Top panel Back panel Warning: This product is heavy. Lift with care.
A Guide to - Wall Mounting & Fixings Important: When drilling into walls always Important note: If plastic wall plugs are supplied with your product: check that there are no hidden wires or pipes etc. Make sure that the screws and wall plugs being used are suitable for supporting your unit. Consult a qualified tradesperson if you are unsure. Hints: - these are only suitable for use in masonry walls. If you are in any doubt about the correct wall plugs for your wall, seek professional advice.
