Spare Parts List

35
For each drawer, slide
both the runners
forward and locate the
drawer sides between
them, lining up the holes
in the drawer sides with
the 2nd 'threaded' holes
in the runners.
Working from the inside
of the drawer, insert 2
screws through the
drawer sides and out
into the 2nd threaded
hole in the runner.
Note: Do not overtighten
the screws.
If they catch on the
runner you may need to
loosen them slightly.
Warning: Use a screwdriver
to position the runners as
they could have sharp edges
www.youtube.com/watch?v=yG4xJJeSg
Fitting Ball Bearing Runners
G
x 6