Metal And Canvas Double Robe Assembly lnstructions - Please keep for future reference 331/9846 323/5528 Dimensions Width - 116cm Depth - 54cm Height - 175cm Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts,call the Customer helpline: 0345 6400800 Issue 1-10/31/14
! Safety and Care Advice Important - Please read these instructions fully before starting assembly • Check you have all the components and tools listed on page 2. • Remove all fittings from the plastic bags and separate them into their groups. • Keep children and animals away from the work area, small parts could choke if swallowed. • Make sure you have enough space to layout the parts before starting • Do not stand or put over weight on the parts this could cause damage.
Components - Parts If you need help or have damaged or missing parts, call the Customer helpline : 0345 6400800 Please check you have all the parts listed below 1 Shelf x 2(75x53.4cm) 2 Shelf x 2(40x54cm) 3 Thin rods x 22(34cm) 4 Thin rods x 5(50cm) 5 Thin rods x 2(70.8cm) 6 Thin rods x 2(70.
Assembly Instructions Step 1 Note:It would be useful to ask someone to help you at this stage. 9 a: 4 a: Attach thin rod 4 to corner 9 and shelf 2 . 9 9 4 9 1 b: Attach shelf 2 to shelf 1 and to corner 9 as shown in the figure. Repeat for 2 bottom shelves. b: Note: Make sure the shelf panel with yellow dot face upwards ! 2 ! 9 4 c: Attach thin rods 3 to corner 9 and shelf 2 .Attach assembled bottom shelf to thin rods 3 as shown in the figure.
Assembly Instructions Step 2 a: Attach thin rods 3 to shelf 2 . Attach thin rods 5 to corner 9 as shown in the figure. 5 a: 5 3 3 3 2 9 3 2 b: Insert thin rods 6 into thin rode 5 . Attach shelf 11 to thin rods 3 and then attach thin rods 3 to shelf 11 . Then, repeat for other 2 shelves. 3 b: 6 3 11 3 3 6 11 5 5 11 2 2 c: Attach thin rods 4 , 7 , 8 to corner 9 and connector 10 as shown in the figure.
Assembly Instructions Step 3 a: Attach assembled top frame to thin rod 6 and thin rods 3 as shown in the figure. b: Insert hanging rods 7 into hook 13 . a: 3 3 6 3 6 3 13 b: 7 13 4 7 c: Attach assembled hanging rod to thin rods 4 as shown in the figure.
Assembly Instructions Step 4 a: Fitting the cover 12 into the assembled frame as shown in the figure. a: 12 Note: It is recommended that two people fit the cover to the frame. b: Fasten the ties at bottom.
Assembly Instructions Step 5 Fixing to wall A wall It is recommended that the wardrobe is fixed to a wall. Note: The correct type of fixing must be used for your wall,seek professional advice if doubt. B Top panel Mark the fixing hole on the wall and remove the wardrobe. Drill a hole and insert a wall plug B . ! Warning: Before drilling, check the wall for hidden pipes and cables. Reposition the wardrobe and fix the wall strap using screw A . The assembly is now complete.
