Assembly Instructions

Simple Assembly Instructions - Please keep for future reference

IMPORTANT

1. Read these instructions carefully and

familiarise yourself with the procedure

before assembling the unit.

2. Check that you have all the component

parts following the list on the back

cover and familiarise yourself with

each part before proceeding.

3. Take all the fittings out of the plastic bag

and separate them into their groups.

4. Ensure you have enough space to lay out

all the parts before assembly.

Chrome Free Standing Toilet Roll Holder

Components

5. To avoid scratching it is recommended

that you assemble the unit on a soft

level surface.

Fittings

1 x Screw

1 x Tube

1 x Tool

1 x Thread Screw

1 x Washer

1 x Roll Holder

1 x Roll Support

1 x Top Ring

1 x Bottom Ring

1 x Bottom Plate

1 x Base

3-03

PAGE 1
Components Chrome Free Standing Toilet Roll Holder A 1 x Tube Simple Assembly Instructions - Please keep for future reference B 1 x Roll Holder C 1 x Roll Support D 1 x Top Ring E 1 x Bottom Ring F 1 x Bottom Plate G 1 x Base IMPORTANT Fittings 1. Read these instructions carefully and familiarise yourself with the procedure A 1 x Screw 3. Take all the fittings out of the plastic bag and separate them into their groups. before assembling the unit. B 1 x Thread Screw 4.
PAGE 2
Assembly Instructions Assembly Instructions Stage 1 – Fitting The Base Stage 2 – Finishing The Unit F B 1. Place the Top Ring D on the top of the Tube. Then screw in the Thread Screw B . See fig. 4 . 1. Use the Screw A and Washer C to fix the Base G into the Bottom Plate F . See fig. 1. D fig. 1 G fig. 4 2. Screw the Roll Support in the unit. See fig. 5. C A A 2. Place the Bottom Ring E on the unit. Then screw in the Tube A . See fig. 2. E fig. 5 3.