2 Pine Shelves With Bracket Assembly Instructions - Please keep for future reference 875/4059 Dimensions Width - 89cm Depth - 19cm Height - 18,2cm Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 03456 400 800 Issue 2 - 29/06/18
Safety and Care Advice Important - Please read these instructions fully before starting assembly • Check you have all the components and tools listed on pages 2 and 3. • Do not stand or put weight on the product, this could cause damage. • Remove all fittings from the plastic bags and separate them into their groups. • Assemble the item as close to its final position (in the same room) as possible. • Keep children and animals away from the work area, small parts could choke if swallowed.
Components - Panels If you have damaged or missing components, call the Customer Helpline: 03456 400 800 Please check you have all the panels listed below 2 Support x 4 (16,4 x 17cm) 1 Shelf x 2 (89 x 19cm) 2
Components - Fittings Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required. A B 40mm Screw x 12 Wall plug (for solid walls only) x 4 Tools required Phillips screwdriver (medium & large) Small hammer Ruler/tape measure Drill 6mm Suitable drill bit (for use with wall plug) For fixing to wall only.
Assembly Instructions Step 1 A 1 on support Fix shelf 01 2 using screw A .
Assembly Instructions Step 2 - Wall plug supplied for masonry wall only. - Wall plug and fixing used must be correct for wall type. - If any doubt seek professional advise. Fix the wall plug B B into the wall and insert screw A , leaving 12mm of the screw outstanding. B A Hang the shelves by inserting the screws into the hole in the supports.
A Guide to -Wall Mounting & Fixings Important: When drilling into walls always check that there are no hidden wires or pipes etc. Important note: If plastic wall plugs are supplied with your product: Make sure that the screws and wall plugs being used are suitable for supporting your unit. Consult a qualifed tradesperson if you are unsure. Hints: - these are only suitable for use in masonry walls. If you are in any doubt about the correct wall plugs for your wall, seek professional advice.
7
