Aubrey - 6ft Bed Assembly Instructions- Please keep for future reference 886/3823 893/4862 880/3797 Dimensions Length - 210,5cm Width - 194,8cm Height - 110cm Important – Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the customer Helpline: 03456 400 800 Issue 11 - 01/06/2020
Safety and Care Advice Important – Please read these instructions fully before starting assembly . Check you have all the components and tools listed on pages 2 and 3. . Assemble on a soft level surface to avoid damaging the unit or your floor. . Remove all fittings from the plastic bags and separate them into their groups. . This product contain natural timber.
Components - Panels Please check you have all the panels listed below 01 Headboard (194,8 x 110,0cm) 04 Central Support (201,0 x 6cm) 02 Footboard (194,8 x 60,0cm) 05 Support Foot x 2 (27,8 x 6cm) 03 Side rails x 2 (200 x 11,5cm) 06 Slats x 26 (89,5 x 6,8cm) 2
If you have damaged or missing components, call theCustomer Helpline: 03456 400 800 Components - Fittings Please check you have all the fittings listed below Note:The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.
Assembly Instructions Step1 D Fitting dowels Insert dowels D into the indicated parts. D 03 03 D D D Step 2 I mm 50 Assembling side rails A: Screw headless bolt I to footboard 02 as shown. Do not over tighten. A: 02 I Do not over tighten the bolts, see indicative measure. G B: Insert washer F to the side rails 03 and fit footboard to side rails. G H F Fix headless bolts I using nuts H and spanner G .
Assembly Instructions Step 3 Assembling side rails 03 B B 03 B 01 01 A C B C 03 A B 03 C 02 A Step 4 Fixing support foot 05 04 O C O C 04 05 05 5
Assembly Instructions Step 5 Fixing L shaped bracket Fix L shaped brackets L into pre-drilled holes in the headboard 01 and footboard 02 using screws J as shown. n. Do not over L J J J J tighten screws. 01 02 Step 6 Fixing central support Fix central support 04 to L shaped brackets in headboard 01 and footboard 02 using bolts M and nut H as shown.
Assembly Instructions Step 7 Fixing slats Using spacer N, centralize slats in bed frame prior to fixing. Fix slats using screws E , as shown. E E N E Fix slats in one side first, then fix them in the other side by pushing the rail against the slats if necessary. Periodically check that all screws are tight. N N N 06 Step 8 Additional step to fixing slats Make sure that s slats screws never collide to the screws on the slats support bar, as shown in the diagram.
8
