User manual

FRIDGE FREEZER | USER MANUAL Customer Helpline 0845 600 4632 4
Do not place the appliance near a heat source or in direct sunlight.
Do not put heavy objects on top of the appliance. It will damage the appliance.
Do not install the appliance in moist and wet place
Adjust the feet at front to level the appliance. It should be installed on a smooth surface to
avoid excessive vibration and noise.
Each appliance has a climate class (shown on the rating plate) where it indicates the
temperature range of the appliance operation in place. The appliance may not work properly if
it is left for a long period at a temperature outside the specified range.
Climate Class
Amb. T. (°C) Amb. T. (°F)
SN
10 ~ 32°C 50 ~ 90°F
N
16 ~ 32°C 61 ~ 90°F
ST
16 ~ 38°C 61 ~ 100°F
T
16 ~ 43°C 61 ~ 110°F
Refer to section “Cleaning and care” to prepare your appliance for use.
Door Reverse
The side at which the door opens can be changed from the right side (as supplied) to the left
side, if the installation site requires.
Before you start lay the refrigerator on it's back in order to gain access to the base, you should
rest it on soft foam packaging or similar material to avoid damaging the cooling pipes at the
rear of the refrigerator.