User manual
PC Connection
10
3. Adding files to your Playlist: Browse and select the files that you would like to add in your
Playlist from the upper column, and then press the
button.
4. Removing files from your Playlist: Browse and select the files that you would like to
remove from your Playlist from the lower column, and then press the
button.
5. Adjusting the Playlist sequence: Select the files that you want to manage and use
or
button to move them a step forward or backward in the Playlist.
6. Selecting the play mode: There are five modes available.
i. Normal: Play from the first of the list down to the end of the list.
ii. Repeat One: Play the first file repeatedly. Press Next to play the next file repeatedly.
It is especially useful for briefing presentation purpose.
iii. Repeat All: Play in normal mode and repeat the entire list after the last file had been
played.
iv. Shuffle: Randomly play the files in the list once.
v. Shuffle Repeat: Play in shuffle mode and repeat the list after all files in the list had
been played once.
Using Private Folder Manager
1. Connect this device to computer: Click on “Start” Ö “All Programs” (Vista: “Programs”)
Ö “Private Folder & Playlist” (Windows Me/98SE: “Private Folder”)Ö “Private
Folder Manager” to launch this utility.
2. This utility will automatically detect devices connected to this computer. Choose the drive
letter you want to setup from the “Drive” at the top of the utility window if you have
mounted more than one device.
3. The folders under the “ROOT” folder will be listed in its window.
Setting the Folders as “Locked Folders”
You can create “Locked Folders” which will not be displayed on TV when using this device
as a media player, and will not be displayed during PC operation either.
1. Choose the drive if necessary.
2. Use cursor to select the folders for following operation.
3. Click “Mark as Locked” button. It will add a lock icon next to the folder name. These
operations will take place immediately after the button is pressed.
4. Input 4 digits of number in the “Password” field.
5. After finishing above settings, click “Exit” button to exit this utility.
You will need to input the same password for next launch of this utility.