User manual

Setup Menu

Press SETUP to display the Setup Menu. See the following to set up the functions:

GENERAL SETUP

OSD LANGUAGE

Select the language to display the SETUP MENU, information and Xvid subtitle.

AUDIO

Select the language for the default audio when playing a DVD movie.

SUBTITLE (For DVD Subtitle Support)

Select the language for the default subtitle when playing a DVD movie.

If “OFF” is selected, the subtitle will not be displayed when play back.

DVD MENU

Select the language for the default menu when playing a DVD movie.

TEXT ENCODING (For Xvid Subtitle Support)

Select a language code page for additional ANSI local code subtitle support. Please refer to

the appendix for the country list (page 31). (*only active if OSD LANGUAGE is set to English)

AUDIO SETUP

This sub-menu can only be set when this device stops playback.

DOWNMIX

Set this function when output audio signal via the Composite connectors:

LT/RT: Outputs the left or right channel to both channels.

Stereo: Outputs stereo audio.

SPDIF OUTPUT

Outputs the digital audio signal via the Coaxial digital audio connector. After enabling this

function, the Composite connector will not output the audio signal.

OFF: Outputs audio via Composite, and disables the digital audio output.

SPDIF/RAW: Outputs the digital audio without decoding. See “PRO LOGIC.”

SPDIF/PCM: Converts the multi-channel audio signal into stereo for output. See “LPCM

OUTPUT.”

PRO LOGIC

This function only works if you have selected “SPDIF/RAW”.

If the movie contains PCM stereo sound, after enabling this function and connected to an AV

amplifier (receiver) equipped with a digital audio decoder, the audio output will be simulated

as multi-channel sound.

OFF: No multi channels simulation.

ON: Outputs audio signal with multi channels simulation.

AUTO: Outputs audio signal with multi channels simulation whenever possible.

LPCM OUTPUT