User manual

Setup Menu
28
This function only works if you have selected “SPDIF/PCM”.
LPCM stands for Linear Pulse Code Modulation, which is a common method for encoding
audio signal in CD and DVD. Higher sampling rate means audio output with more detail to
meet Hi-end audiophile equipment requirements.
LPCM 48K: The sampling rate of the digital audio output will be limited at 48KHz.
LPCM 96K: The sampling rate of the digital audio output will be limited at 96KHz.
VIDEO SETUP
This sub-menu can only be set when this device stops playback.
TV STANDARD
NTSC: Outputs NTSC signal to TV.
PAL: Outputs PAL signal to TV.
TV DISPLAY
4:3 PS: Displays the 16:9 images in “Pan and Scan” with a 4:3 ratio TV connected.
4:3 LB: Displays the 16:9 images in “Letter Box” with a 4:3 ratio TV connected.
16:9: Connects to a 16:9 wide screen TV.
PICTURE MODE
AUTO: Follows the contents to output the picture mode.
FILM: Always output progressive scan.
VIDEO: Always output interlaced scan.
SMART: Enhanced picture quality of the AUTO mode.
VIDEO OUTPUT
COMPONENT : Outputs video signal via both composite and component connectors.
COMPONENT OUTPUT
SD INTERLACE : When connecting to a TV equipped with Y/Cb/Cr video input.
SD PROGRESSIVE: When connecting to a TV equipped with Y/Pb/Pr video input.
Enabling this option will make VIDEO OUTPUT options disabled
720P: When connectin
g
to a TV supports hi
g
h definition video input, enablin
g
this option will output in 16:9 up-scaling component video format for
High Definition displays.
Enabling this option will make TV STANDARD/TV DISPLAY/VIDEO
OUTPUT options disabled.
1080I : When connectin
g
to a TV supports hi
g
h definition video input, enablin
g
this option will output in 16:9 up-scaling component video format for
High Definition displays.
Enabling this option will make TV STANDARD/TV DISPLAY/VIDEO