User manual

The Remote Control
2
The Remote Control
Removing and Storing the Remote Control
This device is designed with a remote control storage compartment at the bottom. You can
store the remote control in the compartment to avoid misplacing.
Using the Remote Control for the First Time
For the first time use of the remote control, pull out the tab
to enable the battery power of the remote control.
Changing the Battery of the Remote Control
If the battery becomes depleted, change the battery according to the following instructions:
Take out the battery holder
1. Turn the remote control on its back, and then press
the tab on the left side with fingernailn. Hold and pull
at the indentationo to take out the battery unit.
Load the new battery
(+ towards up)
2. The battery model of this remote control is CR2025.
Refer to the illustration to insert the battery accurately
with the positive terminal facing up – see illustration
below.
Insert the battery holder
3. Place the new battery and make sure it is inserted and
seated securely.