User manual

Table Of Contents

Quick Start

Read before use.

1. Do not operate electronics with wet hands.

2. Do not operate this device in a bathroom or near water.

3. Do not bend cables in a sharp angle.

4. Keep this device and cables out of reach of children.

5. Keep this device and its accessories away from heat sources.

How do I use this device?

This device plays media contents stored in its internal HDD, or in an external USB storage

connected to it. In the Home Menu, select the mode and the medium you want to browse,

and then press the

ENTER button to start playback.

How do I copy media files into it?

1. Connect the AC adapter to this device.

2. Connect this device to your computer with the USB cable.

3. Press the Power Switch on the rear panel to turn on this device.

4. Copy files just like using a USB external HDD. (No additional software is needed!)

5. Disconnect this device from your computer using safe remove procedure of your OS.

How do I play media files on my TV?

1. Connect this device to your TV with correct cables.

2. Plug the AC adapter into the Power Connector.

3. Press the Power Switch on the rear panel, or press the

STANDBY button on the

remote control to activate this device.

4. Browse with the cursor buttons and the

ENTER button.

What if my TV screen displays unstable image?

Press the TV SYS button repeatedly until the image goes steady. The TV SYS button

functions only when this device first boots up and is disabled after you start browsing its

interface.

How to configure settings?

Select and enter the SETUP option in the Home Menu.