User Manual Part 1

User’s Manual 35
3.10 WLAN Setting
1. After enable WLAN setting, a POP window appears as below. Figure 3-33
Figure 3-33 WLAN setting
2. If the above window doesn’t show, try to double click the Wireless icon on the screen
bottom.
3. Select new connection and press Connect button or double click the new connection,
BU01-WPA for instance; it will appear the configuration window (Figure 3-34). Then user
can set wireless Encryption on this window.
Figure 3-34 Wireless Properties
4. After setting, press OK to connect to AP server (wireless AP server must setup
completely before connection). WiFi connection can work now.
5. Wireless icon
Icon Description
Not Connected
Signal Strength