How to pair bluetooth under Basic Mode (HID) (default) ? Android: Connect Android Device in Basic Mode (HID) 1. Power on the scanner. The LED light will be flashing. 2. Touch Home / Menu / Settings / Wireless & Networks / Bluetooth Settings. 3. Make sure the device has Bluetooth “On”. 4. In the list of found devices, select “Argox Bluetooth”. Tap Pair. 5. The scanner will make one long beep after bluetooth paired and LED light will turn to solid blue (no blinking). Apple: Connect Apple iOS Device (HID) 1.
Important Notes: • Make sure the device is in range with bluetooth. • Scanner will power off if there’s no work within 1 minute. • Pressing the scan button will initiate the attempts to connect. Un-Pair Bluetooth : Below two steps to unpair the bluetooth from previous device completely. 1.Scan Un-pair Bluetooth HID , Scanner disconnected from current device and waits for other device to be paired. 2.Remove or Ignore"Argox Bluetooth" from your previous device.
Application Mode (SPP)(Serial Port Profile) • For Android or Windows • If you have an application that supports our scanners, this is the mode Bluetooth SPP Important Notes: If you want to shift from HID to SPP or BLE, just scan the corresponding command barcode. If you want to shift from SPP or BLE to HID mode, first ignore (or delete) "Argox Bluetooth"→ turn off bluetooth→ scan command.
Reading Mode: Trigger Reading Continuous Reading Automatic Reading Beep Control: Beep Off Beep On -4-
Working Mode: Normal Mode: Data will be uploaded after each scan at real time. Normal Mode Store Mode: All scanned data will be stored directly into the memory of the device. Store Mode Output Stored Data: All data entries in the buffer memory can be uploaded after reconnecting to the working station. Uploading the Data Output Total Entry: The gross quantity of the uploaded data entries will be summarized .
Clear All Memory: A ll data in the buffer memory will be deleted (Use with caution!!!) Clear All Memory Terminator configuration: *None(default) CR(\r) TAB(\t) CR LF(\r\n) -6-
Idle Time Scanner will stay awake during the idle time that you set for it and turn to sleep if you haven't used it during the whole idle time.
Keyboard Language: America EN Keyboard French Keyboard Germany Keyboard Italy Keyboard Portugal Keyboard -8-
Spain Keyboard Turkish Q Keyboard Turkish F Keyboard UK Keyboard Belgium Keyboard Japanese Keyboard For other language keyboards, please contact sales for details -9-
Get Version: Restore to Factory Set: Step 1, Step 2, Step 3, Step 4, - 10 -
Instructions for the base: 一.Data transmission 1. Connect the USB data cable, and the blue light on the base flashes; 2. When the Bluetooth is paired with the Bluetooth on the base, the blue light on the base is steady on; 3, the transmission mode of the base is divided into serial port, USB HID and USB virtual serial port three ways; 4. The transmission mode of the base can be set by bar code or command. 二.charging 1.
RF exposure statement This equipment complies with the FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. FCC Warning This device complies with Part 15 of the FCC Rules.
