User`s manual

CP-2140 & CP-2140E User‟s Manual

1. Turn off the printer. Plug the power cable into the power

socket on the wall, and then connect the other end of the

cable to printer's power socket. Connect the USB cable to the

USB port on the printer and on the PC.

2. Turn on the printer. If the printer supports Plug-and-Play, and

you have successfully connected it using a USB cable, then

the Windows Add Hardware Wizard will automatically detect

the printer and display a dialog that allows you to install a

driver. Click Cancel and do not install the driver using this

wizard.

3. Prepare the documentation and software CD-Rom from

printer package and then install to CD-Rom drive of your

computer. The CD-Rom will bring out the following prompt.

Click “Go”: