User`s manual

4.1.4 Test

Test > Memory Test

Test the data memory (DDRRAM), and the results will be shown on the screen. To stop and

exit the test, press [ESC]

Notes:

 The data saved on C:\ maybe lose after the memory test.

Test > Buzzer Test

Test the buzzer with different frequency / duration combination. Press [ENT] to start. To stop

and exit the test, press any key.

Test > LCD & LED Test

Test the LCD display and LED indicator. Press [ENT] to start. To stop and exit the test, press

any key.

Test > keypad Test

Test the rubber keys. Press any key and its corresponding character will be shown on the

screen. To stop and exit the test, press [ESC].

Test > Com Port Test

After a Com Port cable is connected properly, run “Hyper Terminal “ on your computer and

start this test on your terminal.

Test > Read Test

Test the reading performance of the scanner. Press [SCAN] to start. To stop and exit the test,

press any key.

4.1.5 Information

Here provides important system information to help diagnose the system.

IPL

IPL Version

BOOT

BOOT Version

Kernel

Kernel version

Scanner

Scanner version

A serial number assigned to the terminal

DefLang

Default language