User`s manual

25
4.2 Supervisor Menu
The Supervisor Menu is generated by a powerful utility, which offers an interface for
engineers (programmers or system integrator) to view system information, change the
congiguration parameter, download programs and run diagnotics.
This memu is designed for engineering tests and maintenance ONLY. For this reason, the
Supervisor Menu provides password protection to prevent unauthorized users from
accidentantlly changing system settings.
How to access the Supervisor Menu?
1. Turn off the PA-20 terminal.
2. Press [1] + [3] + [0] + [Power]
Note:
 The Supervisor Menu is NOT for the use of any end users. The system
password helps ensure system safety and integrity.
4.2.1 Communication
File Transfer
Upgrade
Interface
Baud Rate
4.2.2 Format Disk
Format C
Format D
4.2.3 Setting
You can change the default setting here.
System Setting
Default Values
Equipment ID
0000
Password
00000
BIOS default
4.2.4 Barcode
Reading Test
Indication
System Setting
Default Values
LED
Enable
Beep
Enable