User`s manual

15
Loading Ribbon and Media
This section describes how to load ribbon and media in the X-
Series printers.
Loading a Ribbon
Note: The X-Series uses transfer thermal printing. The ribbon is
coated inside.
1. Lift the top cover and front access door to expose the media
compartment. (Figure 1)
2. Turn the head latch counter-clockwise and open the bracket.
(Figure 2)
1
16
3. Unwrap the ribbon and separate the ribbon roll from the
bare core. Insert the ribbon roll onto the ribbon supply
spindle. (Figure 3)
Bracket
2
Head
Latch
3
Ribbon Supply
Spindle