User`s manual

27
Cutting Mode
Follow steps 1 to 3 in “Loading the Media – Standard Mode” above.
4. Insert the media into the print head module and under the
paper sensor guide. (Figure 16)
Paper Sensor Guide
Print Head Module
16
28
5. Return the outside media guide, close the bracket, and hook
the head latch. (Figure 17)
6. Close the top access door and turn on the printer or press
the FEED button if the printer is already on. The printer will
then feed the labels through the cutter automatically. (Figure
18)
Bracket
Outside Media
Gu
ide
Head
Latch
17